A3 + S1000+ + Lightbridge 2 + Zenmuse Z15-BMPCC

A3 + S1000+ + Lightbridge 2 + Zenmuse Z15-BMPCC

Features

LARGE CARRYING CAPACITY, STRONG AND STABLE

Free yourself from weight limits and fly with heavy DSLR cameras such as the 5D Mark III with the advanced eight-rotor propulsion system of the S1000+. The S1000+'s arms and landing gear are made of sturdy carbon fiber, giving remarkable stability and strength. You're flying in a variety of flight conditions with confidence, knowing your gear is safe.

HIGHLY PORTABLE, WITH FOLDABLE ARMS

With arms that fold in to save space, the S1000+ is built to be taken wherever you need to go. Then when you want to fly, you are ready to start shooting in just a few minutes.

REMOVABLE UPPER CENTER BOARD

The upper center board can be removed, giving you access to the IMU. Additionally, there are eight positions reserved for your extra equipment. So installation of your main controller, iOSD, Lightbridge, or any other accessories is faster and easier than ever before.

This new center board structure is perfectly compatible with the DJI WKM and A2 flight controllers.

NEW POWER DISTRIBUTION SYSTEM

A redesigned, rebuilt power distribution system improves safety and reliability. Gold-plated metal bearings with a unique screw design secure the power cords, ensuring cables will not come loose during flight and allowing easy setup.

SPARKPROOF PLUG

Prevent short circuits and easily plug in your power supply with the AS150 sparkproof plug.

PROFESSIONAL QUALITY

Weighing just 4.4kg, the S1000+ has a maximum takeoff weight of 11kg. This means you can easily carry most cameras and gimbals, including your 5D Mark III. Used with a 6S 15000mAh battery, it can fly for up to 15 minutes.

WIDE RANGE OF SHOOTING ANGLES

Retractable landing gear and a low gimbal mounting bracket combine to enable a wide range of possible shooting angles and camera motions.

COMPATIBLE WITH ZENMUSE GIMBALS 

Full compatibility with DJI's entire line of Zenmuse Z15 camera gimbals, including the new Z15-5D III (HD), provides unmatched stability in flight.

REDUCED VIBRATIONS, CLEARER FOOTAGE

The S1000+'s gimbal bracket is separated from the main frame by specifically designed dampers. This significantly reduces high-frequency vibrations and makes your shots clearer and sharper.

GREATER POWER

A 40A electronic speed controller (ESC), our fastest available, is built in to each arm. The 4114 pro motors, high performance 1552 folding propellers, and V-type mixer design combine to give each arm of the S1000+ a maximum thrust of 2.5Kg.

Our latest motor adopts a single wire stator design, offering improved heat dissipation, better performance, and a tidier, more reliable system.

INNOVATIVE ARM DESIGN

Each arm is designed with an 8°  inversion and a 3°  inclination, making the aircraft more stable when rolling and pitching, yet more flexible when rotating.

Specs

Frame

Diagonal Wheelbase

1045mm

Frame Arm Length

386mm

Frame Arm Weight

(Including Motor, ESC, Propeller )

325g

Center Frame Diameter

337mm

Center Frame Weight (With Landing Gear Mounting Base, Servos)

1520g

Landing Gear Size

460mm(Length)x511mm(Width)x305mm(Height)

Motor

Stator Size

41x14mm

KV

400rpm/V

Max Power

500W

Weight(With Cooling Fan)

158g

ESC

Working Current

40A

Working Voltage

6S LiPo

Signal Frequency

30Hz ~ 450Hz

Drive PWM Frequency

8KHz

Weight(With Radiators)

35g

Foldable Propeller (1552/1552R)

Material

High strength performance engineered plastics

Size

15x5.2inch

Weight

13g

Flight Parameters

Takeoff Weight

6.0Kg ~ 11.0Kg

Total Weight

4.4Kg

Power Battery

LiPo (6S,10000mAh~20000mAh,15C(Min))

Max Power Consumption

4000W

Hover Power Consumption

1500W (@9.5Kg Takeoff Weight)

Procedurile de inregistrarea la AACR le puteti gasi aici.

Informatii utile despre siguranta controller-ului le gasiti aici.